Eitan Q Core Sapphire, Руководство пользователя

Страница: 166 / 294

Sapphire Infusion Pump User Manual 165
6.
From the Attention screen, confirm the concentration and press
OK
.
If the selected drug unit is Million Units, continue to Step
9
.
7.
If the
Patient Weight
screen appears, specify whether the infusion is weight
based:
•
Yes
: Continue to Step
8
.
•
No
: Continue to Step
9
.
8.
If the
Patient Weight
screen appears, using the keypad, enter the patient weight

OK
.
9.
From the
Dose Rate units
screen, select the appropriate dose rate units.
10.
Using the keypad, enter the
VTBI
value

OK
.
11.
Using the keypad, enter the
Continuous Rate
value

OK
.
The Continuous Rate can be set to zero.
12.
Using the keypad, enter the value for the Demand Bolus

OK
.
13.
Using the keypad, enter the value for the Bolus Lockout

OK
.
14.
From the Dose Limit Type screen, specify whether the infusion is according to
dose limits:
•
Yes
: Continue to Step
15
.
•
No
: Continue to Step
16
.
15.
From the Dose Limit Type screen, select the appropriate Dose Limit type, and
proceed to the directed step:
•
Number of Boluses
: Using the keypad, enter the maximum number of boluses
that will be available for the patient within a one or four-hour period

OK
.
Continue to Step
16
.
Choosing No on the Dose limit screen will set patient boluses to
the maximum allowed, according to the other parameters defined
for the infusion, including Lockout Time and Demand Bolus.