Preventative Controls
& Detection Systems
Operating the Bactiscope
1. To turn on screen press the power button on the
monitor for 0.5sec
2. To turn on the camera press the camera button,
there will also be a blue and red light on the left-
hand side of the device which will turn on.
3. Press the Light button to activate the Bactiscan
Light
4. In order to record videos press the Rec button on
the monitor for 0.5sec, this will cause the blue light
to flash indicating the recording has started.
a. LED Status
i.
Red LED
Constantly on — Power
status light
ii.
Blue LED
Constantly on In standby
mode
iii.
Blue LED
Blink slowly (1 time per
second) — In recording mode
iv.
Blue LED
Blink quickly (2 times per
second) — Micro SD is full or failed
to be recognized
b. Format SD Card
i. In standby mode, long press the Rec
button for 5 seconds, the SD card
will be formatted and recording will
start.
5. To stop recording press the Rec button again for
0.5sec, the blue light will then stay on.
6. To turn the camera off press the camera button,
the monitor will no longer show an image
7. To turn the light off press the Light button
Please note
Recording files will be saved automatically in segments
lasting 5 minutes and recording stops when Micro SD
card is full.
It takes about 2G capacity for 1 hour recording. Thus an
8G Micro SD card can record about 3.5 hours.
Ensure you stop recording before power off. Otherwise,
you will miss your last recording.
Specifications
P
ower on
1hour 30 mins
Charge time
6 hours 30 mins
Warranty
1 year
UV light type
UV-A
UV bulb life
6,000 hours
I
P ra
t
ing
IP65
Battery
7.4V 6.6Ah Li-ion
Impact resistance
1.5 metres
Carry case dimensions
357 x 470 x 176 (mm)
Watch recordings
1.
Remove the SD card from the unit
2.
Place SD card in computer
3.
Open files and view recordings
4.
Place SD card back in unit
Weight
1.
5
KG
Dimensions
123
x
2
7
4 x 248
(mm)
Video capture
Yes
4
