EisSound kb sound, Руководство пользователя

Страница: 6 / 12

EIS
5
1.- None of the functions (except ON/OFF) work unless the remote
control is in “on” mode.
2.- Functions pertaining to operating the audio signal only work
when “mute” is cancelled.
3.- The LED on the data receiver can change color depending on the
control unit's mode:
OFF the control unit is off
GREEN the unit is on
RED the unit is receiving data from the remote control
4.- When activating or canceling a function (loudness, stereo/mono
or mute):
4 RED flashes: function is cancelled
£
£
£
1
1
RED flashing: function is activated
5.- Once the ® is connected to the mains, it will remain
powered even it is in OFF state. That means that the OFF state (as
indicated in this manual) really means a “standby” state
kb
sound
2. General Operating Notes
The control unit generates sound signals to communicate the
status of operations carried out. These signals are reflected in
this manual as follows:
A short BEEP sound signal indicates that the data
was received.
A long BEEP sound signal indicates that an
operation was correctly completed.
A series of BEEP sound signals indicates that a
clearing operation was executed or that there is an
error.
A BO BEEP sound signal indicates that the memory
pre-set station tuned at the moment is station
number one, or that the tuner's frequency is set at
87.5 MHz (the lowest on the dial).
Certain operations require a remote control key to be held down
for a certain amount of time. This is indicated in the manual by
a hand symbol next to the key.
BEEP
BO BEEP
BEEP
BEEP BEEP BEEP
Symbols Used in this Manual
FOR KITCHENS & BATHROOMS
kb sound
®
ENG