Eisno EIS-F-HC-S01 Скачать руководство пользователя страница 10

The oven chamber should only be wash-     
ed with warm water and a small amount  
of washing-up liquid.

 

Steam

 

cleaning

-pour 250m l of water (1 cup) into a  
bowl placed in the oven on the first level 
from the bottom. 

-Close the oven door, 
-Set the temperature knob to 50

, and 

the function knob to the bottom heater 
position, 
-heat the oven chamber for approximately      
30 minutes,

 

-Open the oven door, wipe the chamber 
inside with a cloth or sponge and wash 
using warm water with washing-up liquid.    

 

CLEANING

 

AND

 

MAINTENANCE

17

Replacement

 

of

 

the

 

oven

 

light

 

bulb

Oven

 

light

 

bulb

 

 

push it with you thumb).Injuries are

Caution

!

The sharp blade should always be 
protected by adjusting the cover(just

 

possible so be careful when using this
instrument-keep out of reach of children.
Appropriate light cleaning or washing
products are recommended,such as 
e.g. any kind of liquids emulsions for

 

fat removal.

Alternatively a solution of 

 

After cleaning the oven chamber wipe it 
dry. 

Caution

!

Do not use cleaning products containing 

abrasive materials for the cleaning and 
maintenance of the glass front panel.

 

When cleaning do not use cleaning 
agents with a strong abbrasive effect,such

as e.g. scouring powders containing an
abrasive,abrasive compounds,abrasive

stones,pumice stones,wire brushes and
so on.They may scratch the hob surface,

causing irreversible damage.
Large spillages that are firmly stuck to the 
hob can be removed by a special scraper;
but be careful not to damage the ceramic
hob frame when doing this.

Scraper for cleaning the hob

warm water with a little washing-up liquid 
or cleaning products for stainless steel 

sinks can be used.

 

CLEANING

 

AND

 

MAINTENANCE

18

Removal

 

of

 

the

 

internal

 

glass

panel

Unscrew and unfasten the plastic latch that 
is in the corner at the top of the door. Next 
take out the glass from the second blocking        

mechanism and remove.After cleaning, 

sert and block the glass panel,and screw in 
the blocking mechanism.

 

Removal

 

of

 

the

 

internal

 

glass

 

panel

Regular

 

inspections

Besides keeping the cooker clean, you 
should:

 

  Carry out periodic inspections of the 

control elements and cooking units of the 
cooker. After the guarantee has expired you 
should have a technical inspection of the  
cooker carried out at a service centre 
at least once every two years.

 

  Fix any operational faults.

 

  Carry out periodical maintenance of the 

cooking units of the cooker. 

Caution

!

All repairs and regulatory activities should 
be carried out by the appropriate service 
centre or by an appropriately authorized 
fitter. 

OPERATION

 

IN

 

CASE

 

OF

 

EMERGENCY

In the event of an emergency, you should: 

switch off all working units of the oven 

Door

 

removal

In order to obtain easier access to the oven 
chamber  for  cleaning , it is possible to 
remove the door. 

 
To do this, tilt the safety catch part of the 

hinge upwards. Close the door lightly, lift 
and pull it out towards you. In order to fit the 
door back on to the cooker, do the reverse. 

When fitting, ensure that the notch of the  

hinge is correctly placed on the protrusion 

of the hinge holder. After the door is fitted 

 to the oven, the safety catch should be 

carefully lowered down again. If the safety 

catch is not set it may cause damage to the 

 hinge when closing the door. 

 

Tilting

 

the

 

hinge

 

safety

 

catches

Door

 

removal

Changing the Oven Lamp

Before any maintenance is started
involving electrical parts, the
appliance must be disconnected
from the power supply.

 

If the oven has been in use, let the 
oven cavity and the heating elements 
cool down before attempting any
maintenance.

Changing the bulb 
   

Unscrew the protective cover.  We 

   recommend that you wash and dry the 
   glass cover at this point.

   Carefully remove the old bulb and 
   insert the new bulb suitable for high 
   temperatures (300

º

C) having the 

   following specifications: 230-240V, 
   50Hz, 25W, G9 fitting.

   Refit the protective cover.

IMPORTANT
Never use screwdrivers or other
utensils to remove the light cover.
This could damage the enamel of the 
oven or the lampholder. Remove only
by hand.
IMPORTANT
Never replace the bulb with bare 
hands as contamination from your 
fingers can cause premature failure. 
Always use a clean cloth or gloves.
Please note:

   

The bulb replacement is not covered 

   by your guarantee

l

 

 

 

l

Содержание EIS-F-HC-S01















Отзывы: