background image

2

1. The appliance is for indoor use only. 

2. Do not use the unit on a socket under repairs or not installed properly.

3. Do not use the unit, follow these precautions: 

A: Near to source of fire. 

B: An area where oil is likely to splash.

C: An area exposed to direct sunlight.  

D: An area where water is likely to splash. 

E: Near a bath, a laundry, a shower or a swimming pool. 

4. Never insert your fingers, rods into the air outlet. Take special care to warn 

children of these dangers.

5. Keep the unit upward while transport and storage, for the compressor locates 

properly. 

6. Before cleaning the air-conditioner, always turn off or disconnect the power 

supply. 

7. When moving the air-conditioner, always turn off and disconnect the power 

supply, and move it slowly. 

8. To avoid the possibility of fire disaster, the air-conditioner shall not be 

covered. 

9. All the air-conditioner sockets must comply with the local electric safety 

requirements. If necessary, please check it for the requirements.

10. Children should be supervised to ensure that they do not play with the 

appliance.

• The appliance must be stored in such a way as to prevent mechanical failure.
• Individuals who operate or work on the refrigerant circuit must have the 

appropriate certification issued by an accredited organization that ensures 

competence in handling refrigerants according to a specific evaluation 

recognized by associations in the industry.

• Repairs must be performed based on the recommendation from the 

manufacturing company. Maintenance and repairs that require the assistance of 

other qualified personnel must be performed under the supervision of an 

individual specified in the use of flammable refrigerants.

3

11. If the supply cord is damaged, it must be replaced by the manufacturer, its 

service agent or similarly qualified persons in order to avoid a hazard.

12. This appliance can be used by children aged from 8 years and above and 

persons with reduced physical, sensory or mental capabilities or lack of 

experience and knowledge if they have been given supervision or instruction 

concerning use of the appliance in a safe way and understand the hazards 

involved. Children shall not play with the appliance. Cleaning and user 

maintenance shall not be made by children without supervision.

13. The appliance shall be installed in accordance with national wiring 

regulations.

14. Details of type and rating of fuses

T, 250V AC,2A.

15. Recycling

    This marking indicates that this product should not be disposed with other 

household wastes throughout the EU. To prevent possible harm to the 

environment or human health from uncontrolled waste disposal, recycle it 

responsibly to promote the sustainable reuse of material resources. To return 

your used device, please use the return and collection systems or contact the 

retailer where the product was purchased. They can take this product for 

environmental safe recycling.

16. GWP: R290: 3

17. Contact authorized service technician for repair or maintenance of this unit.

18. Do not pull , deform . or modify the power supply cord , or immerse it in 

water . Pulling or misuse of the power supply cord can result in damage to the 

unit and cause electrical shock.

19. Compliance with national gas regulations shall be observed.

20. Keep ventilation openings clear of obstruction.

21. Any person who is involved with working on or breaking into a refrigerant 

circuit should hold a current valid certificate from an industry-accredited 

assessment authority, which authorizes their competence to handle refrigerants 

safely in accordance with an industry recognized assessment specification.

Содержание SKY-3A















Отзывы: