3.
Assembly
Configurations
-
Drawing 5
48
Software:
Basic
Settings (continued)
5.
Double-check
to
ensure
that
the
Domestic
Hot
Water
option
is
enabled
under
6.
Configure the desired setpoint for water temperature (default set to 50°C):
4.
Temperature configuration options for Heating/Cooling circuit 2 are found under
H.1.
Setting
a
heating
curve
:
H.2.
If
no
heating
curve
is
desired:
4.1.
Activate
the
mixing
valve
to
manage
the
second
circuit:
Note: This pair of settings will interpret “Heating/Cooling Circuit 2 as the low demand distribution
system,requiring
a
lower
set
temperature
for
heating
and
higher
set
temperature
for
cooling.
H.
configuring
the
set
water
heating
temperatures:
3.(cont.)
Configure
the
water
pump
to
operate
for
heating
or
cooling
:
C.
Configuring
the
set
water
cooling
temperature (if
applicable):
