2. Installation Manual
13
EIS
2.1 Installation with the New 100 Series Control Units
2.2 Installation with the 400 Series
Control Units
R
R
R
Refer to E100/1 for the installation of a 13503 intercom
microphone base for general intercom transmission in 2 or 4
channel installations. The wiring is identical in both cases, using
12701 line connection devices.
The only difference is the
connection of the background music channels.
Installation of 2 channels is possible with control units 32191 (2
channels) and 32196 (1 c FM tuner). Four-channel
installation is possible by using control unit 32195.
Several microphone bases connected to one or more control units
can coexist in a single installation.
2.1.1. General Paging Installations
2.1.2. Individual Paging Installations
R
R
R
For intercom transmission by zones in 2 and 4 channel installations
see E 100/2 and E 100/3 respectively. Note that connection of base
13503 with line connector 12701 and zone extension module 13504
is identical in both cases. The only difference is the connection of the
background music channels.
In the New 100 Series, the number of zone assigned to each control
unit is defined by the cable that is connected to its connection terminal
9 so that zone number 1 is connected to cable Z1, zone number 2 is
connected to cable Z2, number 8 to cable Z8, number 14 to cable
Z14, etc.
Several bases can coexist in a single installation by connecting to one
or more control units.
R
R
R
R
Line connection device 12701 is used to connect intercom microphone
base 13503 to 400 Series control units (compact and modular), as
shown in diagram E400.
Connection can also be made to central unit 41491 or 41492.
The identifying number of each zone is defined by each control unit.
The microphone base identifying number is programmed at the base
itself (see 3.6.).
Several bases can coexist in a single installation by connecting to one or
more control units.
ENG
SERIE
2
3
1
PRG
PRG
PRG
2
1
3
The first time that Base 13503 is powered must
be defined the type of installation to which it is
connected: key 1 for New 100 Series (diagrams
E100/1), key 2 for New 100 Series with call
extension (diagrams E100/2 and E100/3), key
3 for the 400 Series (diagram E400). The type
of installation can be manually changed (see
3.7).
The diagrams only show the connections involving the base device
(13503) and the zone extension device (13504). To view connections
with other elements of the installation see CC-1003 Wiring Diagrams.
