9
To get into the chair
While standing next to your riser recliner chair, press “Button 1” to raise the riser recliner chair to a height
you can sit on comfortably with both feet firmly on the ground. This height will vary from person to person.
When in position and ready, lean against the chair and press “Button 2”.
As the chair continues downward move yourself into a sitting position. Release the button when the chair
is firmly set on the floor.
To control the Leg Rest
Press “Button 2” to raise the leg rest of the riser recliner chair, you may choose to release the button at
any time when the leg rest is at the desired angle or raise this part up a full 90 degrees. If the leg rest
section reaches a full 90-degree lift, the control will automatically stop raising. Pressing “Button 1” will
reverse the functions to lower the leg rest.
To control the Backrest
Press “Button 4” to lower the backrest of the riser recliner chair, you may choose to release the button at
any time when the backrest is at the desired angle or have been lowered to a lying position. Pressing
“Button 3” will reverse the functions to raise the backrest up to a 90 degree angle.
To get out of the chair
First, ensure the backrest is in its full upright position by pressing “Button 3”. Then, by pressing “Button 1”
you shall be able to reverse the functions mentioned above, lowering the leg rest if raised. This function
may be stopped at any time by releasing “Button 1”. Once both parts are at their rest position, the riser
recliner chair will start to slowly rise and shift your weight forward. It is recommended to steady yourself
by holding onto the armrests of the chair while it is rising.
When the riser recliner chair reaches a height, which allows you to comfortably stand with both feet firmly
on the ground, release “Button 1”. You may wish to leave the riser recliner chair in this position so that it
will be ready for you next time you require usage of the riser recliner chair.
Содержание Riser M1801
Страница 1: ...1...
