EIPL 1021800, Руководство пользователя, Страница: 3 / 11

OPERATION
The fan draws moist air through the
refrigerated surface which cools it
below it’s dew point, removing
moisture which is collected and lead
away. The cool air then passes over
the hot condenser, where it is
reheated. With the addition of other
radiated heat the air is discharged
into the room at a higher temperature
but a lower relative humidity than
when the air entered the unit.
Continuous circulation of the room
air through the dehumidifier unit
gradually
reduces the relative
humidity in the room.
The BD150 Industrial Dehumidifier is
a robust, compact unit designed to
control the humidity in the enclosed
space in which it is placed.
The unit is thermally protected and
will switch off for a period if the
maximum operating temperature of
35°C is exceeded.
MAINS PLUG WIRING
INFORMATION FOR EBAC
INDUSTRIAL DEHUMIDIFERS
IMPORTANT
The wires in the mains lead are
coloured and must be connected as
shown in the diagrams above by a
qualified electrician.
ELECTRICAL CONNECTIONS
The wire which is coloured Green
and Yellow must be connected to the
terminal marked E or by the Earth
symbol. The wire which is coloured
Blue must be connected to the
terminal in the plug which is marked
with the letter N or coloured Black.
The wire which is coloured Brown
must be connected to the terminal
which is marked with the letter L or
coloured Red.
CHANGING THE FUSE
13 amp fuses that are ASTA
approved to BS1362 should only be
used.