Page 3 of 16
Drawing : - TPC450
Issue
: - 1
Date
: - 18/01/16
INTRODUCTION
Dehumidifiers remove moisture from the air that is circulating through the unit.
The resulting reduction of relative humidity helps prevent rust, rot, mold,
mildew and condensation within the room, or other enclosed spaces where
the dehumidifier is used.
A dehumidifier consists of a motor-compressor unit, a refrigerant condenser,
an air circulating fan, a refrigerated surface, a means of collecting and
disposing the condensed moisture and a cabinet to house these components.
The fan draws air through the refrigerated surface and cools it below its dew
point, removing moisture which is collected and led away. The cool air then
passes the hot condenser, where it is reheated. With the addition of other
radiated heat the air is discharged into the room at a higher temperature but
lower relative humidity than when the air entered the unit. Continuous
circulation of the room air through the dehumidifier unit gradually reduces the
relative humidity in the room.
A digital Humidistat is included which allows for precise humidity control. A
programmable display lets you set a specific desired humidity level.
The K100H dehumidifier is a rugged reliable drying unit designed to operate
effectively over a broad range of temperature and humidity conditions. A
powerful and reliable active hot gas defrost system, controlled by an
electronic timer, guarantees positive de-icing and thereby optimizing operation
at low temperatures.
The unit incorporates a welded steel chassis and is finished in vinyl coated
steel covers for resilience to damage caused by rough handling.
The K100H has a number of special features:
•
Ebac’s “Reverse Cycle” defrost system
•
Integral pump out system
•
Provision for permanent drainage
•
Exterior epoxy powder-coated finish
•
Extra long power cord
•
Free Standing or Wall Mountable
•
Status Indicator
•
Digital Humidistat Controller
E B A C K - 1 0 0 H D E H U M I D I F I E R
Pure n Natural Systems | purennatural.com | 1-800-237-9199
