Connecting external sensors
•
External sensors can be added by connecting a sensor cable to
einstein
™
LabMate
+
.
Insert the sensor cable into one of
einstein
™
LabMate
+
’s 4 sensor ports, then,
connect the other end of the sensor cable to the sensor. Up to 8 external sensors
can be added by adding a splitter to each port.
Please note the position of the sensor’s USB connector.
When properly positioned, the sensor should glide in smoothly.
•
einstein
™
LabMate
+
supports all Fourier Education’s sensors, though some
sensors may require an additional cable or adapter.
For a complete list of sensors, please visit our website.
Specifications:
CE & FCC
Internal sensors
Light:
0-600 lux, 0-6000 lux,
0-150 klux
Heart Rate:
0-200 bpm
Relative Humidity:
Range: 0-100%
Temperature:
-30°C to 50°C
UV:
10 W/m2, 200 W/m2,
UV wave length 290-390 nm
Pressure:
20 to 400 kPa,
0.2 to 3.9 atm, 200 to 4000 mbar
15
14
Data Logging
Sampling Rate
Up to 100 ksps
Internal memory
capacity
Up to 250k samples
Power Source
Battery (Lithium
polymer; 1000mAh)
Rechargeable via
USB
Run mode
up to 24 hours
Standby mode
up to 450 hours
Charge time
3 hours
Standards Compliance
Содержание LabMate+
Страница 1: ...1 Welcome to einstein LabMate ...
