Eink MeeNote Evaluation Kit, Стандарты руководства пользователя, Страница: 22 / 23

20
6 Troubleshooting
Below is a list of commonly asked questions and basic troubleshooting steps of T1000
evaluation board.
Table 4.1 Troubleshooting
Num Issue Possible Cause and Solution
1
T1000 device is not visible on PC
USB cable damage
Replace USB cable.
2
T1000 device is not visible on PC
Battery in low power
Recharge Battery to 4.0V ~4.2V .
7 Legal Information

Definitions
The document is a draft version only. The content is still under internal review and
subject to formal approval which may result in modifications or additions. E Ink does
not give any representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of use of
such information.

Right to make changes
E Ink reserves the right to make changes to information published in this document,
including without limitation specifications and product descriptions, at any time and
without notice.

Suitability for use
Products described in this document are intended for development purposes only and
comes without any warranty. E Ink accepts no liability for inclusion and/or use of E
Ink products in commercial products or applications and therefore such inclusion
and/or use is at the customer’s own risk. In no event shall E Ink be liable for any direct,
indirect, incidental, special, exemplary, or consequential damages (including, but not
limited to, procurement of substitute goods or services; loss of use, data, or profits; or