EINHELL TE-VE 550 A, Оригинальная инструкция по эксплуатации

Страница: 22 / 162

GB
- 22 -
tractor connection of the equipment you want
to use.
•
If you wish to operate devices with an ext-
raction connection diameter of 36 mm, place
the reduction adapter (17) on the free end
of the extractor hose (11) and secure it with
the hose clip (A) (Fig. 14-15). One or two
extractor hoses with a diameter of 36 mm can
now be connected to the reduction adapter
(17). Leave the sealing stopper on the second
opening on the reduction adapter (17) if you
only wish to operate on 36 mm hose. To use
tow 36 mm hoses, remove the sealing stop-
per and use both 36 mm connections on the
reduction adapter (17).
7. Operation
7.1 Switching on (Fig. 1,16)
•
Check whether the extractor hose (11) is
tightly connected to the vacuum extraction
system and to the extractor adaptor of the
wood processing machine.
•
Check whether the debris bags (2/6) are se-
curely fastened.
•
Switch on the vacuum extraction system by
pressing the button “I”.
•
Switch on the wood processing machine.
7.2 Switching o ff (Fig. 16)
•
Switch off the wood processing machine.
•
Switch on the vacuum extraction system by
pressing the button “0”.
7.3 Switching o ff /on in automatic mode
(Fig.16)
•
The ON/OFF switch (15) has three settings:
Switch position 0 : Off
Switch position = : On
Switch position AUTO: Automatic mode
(The extractor system is switched on/off via
an electric tool).
•
Connect the power cable of your electric tool
to the automatic socket-outlet (19).
•
Connect the extractor hose (11) to the dust
extractor connection of your electric tool.
Check that the connection is secure and air-
tight.
•
Set the switch (15) on the extractor system to
the position “AUTO” = Automatic mode.
•
As soon as you switch on the electric tool the
extractor system will start up.
•
When you switch off the electric tool, the
extractor system will switch off as well after a
pre-set delay.
7.4 Emptying the sawdust bag
Inspect and empty the sawdust bag (6) regularly!
•
Important: Remove the power plug!
•
Hold the filled sawdust bag in place with one
hand.
•
Open the quick clamp device (5).
•
Remove the bag and dispose of the contents
in an environmentally-friendly fashion.
•
Put the bag back into the holder and secure
with the quick clamp device (5).
7.5 Transportation (Fig. 17)
•
The vacuum extraction system has a stan-
dard chassis (8).
•
For transportation, gently lift the vacuum ex-
traction system by the transportation handle
(4) and move it to the desired location.
Anl_TE_VE_550_A_SPK9.indb 22 Anl_TE_VE_550_A_SPK9.indb 22 17.06.2019 09:09:39 17.06.2019 09:09:39