GB
- 18 -
When wet vacuuming, the
fl
oating safety switch
(21) closes when the maximum tank level is
reached. In doing so, the suction noise of the
equipment will change and become louder.
You must then switch o
ff
the equipment and em-
pty the tank.
Danger!
The wet and dry vacuum cleaner is not suitable
for the vacuuming of combustible liquids.
For wet vacuuming, use only the supplied foam
fi
lter.
6.4 Automatic mode
Connect the power cable on your electric tool to
the automatic socket-outlet (4) and connect the
suction hose (9) to the extractor connector on
your electric tool. Check that the connections are
secure and air-tight.
You can use the supplied electric tool adaptor
(22) to connect the suction hose (9) to the electric
tool. To do so,
fi
t it between the suction hose and
the extractor port on the electric tool.
Set the switch (7) on the wet and dry vacuum
cleaner to position AUTO, automatic mode. The
moment you switch on the electric tool, the wet
and dry vacuum cleaner switches on as well.
When you switch o
ff
the electric tool, the wet and
dry vacuum cleaner switches o
ff
as well after a
pre-set delay.
6.5 Blowing
Connect the suction hose (9) to the blow connec-
tor (19) on the wet and dry vacuum cleaner.
7. Replacing the power cable
Danger!
If the power cable for this equipment is damaged,
it must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
8. Cleaning, maintenance and
ordering of spare parts
Danger!
Always pull out the mains power plug before star-
ting any cleaning work.
8.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible.
•
We recommend that you clean the appliance
immediately after you use it.
8.2 Cleaning the appliance head (5)
Clean the appliance regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plas-
tic parts in the appliance.
8.3 Cleaning the container (10)
The container can be cleaned with a damp cloth
and some soft soap or under running water, de-
pending on the amount of dirt.
8.4 Cleaning the
fi
lters
Cleaning the pleated
fi
lter (24)
Clean the pleated
fi
lter (24) regularly by carefully
patting it and cleaning it with a
fi
ne brush or hand
brush.
Cleaning the foam
fi
lter (25)
Clean the foam
fi
lter (25) with a little soft soap un-
der running water and allow it to air-dry.
8.5 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.6 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
Anl_TE_VC_2340_SA_SPK7.indb 18
Anl_TE_VC_2340_SA_SPK7.indb 18
11.12.14 10:25
11.12.14 10:25
Содержание TE-VC 2340 SA
Страница 145: ... 145 Anl_TE_VC_2340_SA_SPK7 indb 145 Anl_TE_VC_2340_SA_SPK7 indb 145 11 12 14 10 26 11 12 14 10 26 ...
Страница 146: ... 146 Anl_TE_VC_2340_SA_SPK7 indb 146 Anl_TE_VC_2340_SA_SPK7 indb 146 11 12 14 10 26 11 12 14 10 26 ...
Страница 147: ... 147 Anl_TE_VC_2340_SA_SPK7 indb 147 Anl_TE_VC_2340_SA_SPK7 indb 147 11 12 14 10 26 11 12 14 10 26 ...
Страница 148: ...EH 12 2014 01 Anl_TE_VC_2340_SA_SPK7 indb 148 Anl_TE_VC_2340_SA_SPK7 indb 148 11 12 14 10 26 11 12 14 10 26 ...