Description of the indicator display
1. Standby mode:
Numerical LED shows the current room temperature.
2. Indoor device switched on:
The temperature indicator and fan LEDs light up: The current room temperature is shown.
The fan LEDs flash (with lines and arrows). When the LEDs go out the indoor fan stops as well.
3. Setting the desired room temperature:
The temperature indicator “- - “ flashes. After approx. 5 seconds the current room temperature will be shown.
Now set the desired room temperature using the keys “
▼
T00 WARM or
▲
T00 COOL” on the remote control.
The current room temperature will then appear.
4. Fan setting:
Indoor fan: The indicator lights up and the fan speed is shown. Setting is completed after approx. 8 seconds.
5. Time setting:
The “Start time/sleep” and the “h” hours indicator light up. The digits show the remaining time to run. For
setting the sleep function the digital indicator shows “-” and switches to the current temperature after 5
seconds.
6
Cool
Dehumidify/Dry
Hours indicator
Fan speed
Fan speed
Indoor fan
Sleep switch-on
time
Automatic function
Heat
Device switched on
Temperature
indicator in °C
Indicator display for the indoor device
Open
close
Emergency switch
Press the two bottom corners (marked with
Push) on the intake grille. The grille swings
open (approx. 25°) and stays in this position.
Note: Never attempt to open the grille by
more than 70° as this may damage it.
This switch can be used as an emergency switch to
switch the system on and off if the remote control fails to
work.
Anleitung SKA 3501 EQ C+H GB 13.12.2004 8:44 Uhr Seite 6
