GB
GB
- 22 -
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with
due care. Retain this manual in a safe place, so
that the information is available at all times. If you
give the equipment to any other person, hand
over these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these in-
structions and the safety information.
1. Safety information
Important! The following basic safety action
measures to be taken when using electric tools to
protect the user from electric shocks and the risk
of injury and fire.
Read all the following information before you use
this electric tool and keep these safety
instructions in a safe place.
1. For your own safety, read and observe this
safety information for the router table and the
information supplied by the manufacturer of
the router.
2. The router table must always be securely
fastened to a workbench in a horizontal
position.
3. Keep your workplace clean and well illumina-
ted.
4. Avoid abnormal working postures. Make sure
you stand squarely and keep your balance at
all times.
5. Never use the machine in the vicinity of
combustible materials, liquids or gases.
6. Wear safety goggles, a visor, a breathing
mask, an apron and long tight sleeves.
7. Keep children away. Do not allow other per-
sons, particularly children, to touch the tool.
Keep them out of your work area.
8. Always leave the safety devices in position
and make sure that they are in good working
order.
9. Check at regular intervals that all screws and
nuts are fastened securely enough, as they
may work loose as the result of vibrations.
10. Make sure that the power cable is a safe
distance from the working area.
11. Do not use the router table with highperfor
-
mance electric tools that are not suitable
for the accessory device.
12. Do not try to machine workpieces which are
obviously too big for the router table.
Caution
- Read the operating instructions to reduce the risk of accident.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Wear safety goggles.
Sparks generated during working or splinters, chips and dust emitted by the de-
vice can cause loss of sight.
Wear a breathing mask.
Dust which is injurious to health can be generated when working on wood
and other materials. Never use the device to work on any materials containing asbestos!
Anl_SA_Anl_RTB_003_SPK8.indb 22
Anl_SA_Anl_RTB_003_SPK8.indb 22
22.06.2021 09:52:34
22.06.2021 09:52:34
