EINHELL RG-ES 1639, Оригинальная инструкция по эксплуатации, Страница: 14 / 76

14
GB
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Voltage: 230 V ~ 50 Hz
Power consumption: 1600 W
Working width: 39 cm
Number of blades 16 pieces
Scarifying depth: Infinitely adjustable up to 10 mm
Sound and vibration
Sound and vibration values were measured in
accordance with EN 13684.
L
pA
sound pressure level 85 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 98 dB(A)
K
WA
uncertainty 3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 13684.
Vibration emission value a
h
= 2.77 m/s 2
K uncertainty = 1.5 m/s
2
Additional information for electric power tools
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect working
order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever
necessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment’s
construction and layout:
1. Lung damage if no suitable protective dust mask
is used.
2. Damage to hearing if no suitable ear protection is
used.
3. Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or
is not properly guided and maintained.
6. Before starting the equipment
The scarifier is delivered unassembled. The grass
basket and the complete push bar must be
assembled and mounted before using the scarifier.
Follow the operating instructions step-by-step and
use the pictures provided as a visual guide to easily
assemble the machine.
Mounting the lower push bar (see Figs. 3 and 4)
앬 Insert the U-shaped lower push bar into the
holes in the housing (Fig. 3).
앬 Now you can fasten the lower push bar using the
screws supplied (Fig. 4/Item 2c).
Mounting the upper push bar (see Figs. 5 and 6)
앬 Position the upper push bar (Fig. 5/Item 2b) such
that its holes line up with the holes of the lower
bar.
앬
Insert the screw (Fig. 5/Item 2f) with washer (Fig.
5/Item 2e) through the tubes from the outside.
앬 Screw the handlebars together using a star grip
(Fig. 5/Item 5).
앬 Attach the handlebar opposite.
앬
Using the cable clips supplied (Fig. 6/Item 2d),
attach the power cable on the inside of the tubes
Anleitung_RG_ES_1639_SPK1:_ 23.05.2010 13:51 Uhr Seite 14