![background image](http://html.mh-extra.com/html/einhell/gc-sc-36-31-li-solo/gc-sc-36-31-li-solo_original-operating-instructions_2371072022.webp)
GB
- 22 -
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Damage to hearing if no suitable ear protec-
tion is used.
2. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
Danger!
The electric power tool generates an electro-
magnetic
fi
eld during operation. Under certain
circumstances this
fi
eld may actively or passively
impede medical implants. To reduce the risk of
serious or fatal injuries, we recommend persons
with medical implants to consult their doctor and
the manufacturer of the medical implant prior to
using the equipment.
5. Before starting the equipment
Warning!
Always pull out the safety plug before performing
any adjusting, repair, maintenance or cleaning
work on the equipment.
The scari
fi
er is delivered unassembled. The com-
plete push bar must be assembled and mounted
before using the scari
fi
er.
Follow the operating instructions step-by-step
and use the pictures provided as a visual guide to
easily assemble the machine.
Fitting the push bar holders
(see Figs. 3 and 4)
Slide the push bar holders (Fig. 3/Item 7) into the
provided openings (Fig. 3) and fasten them with
the retaining screws (Fig. 4/Item 14).
Fitting the lower push bars (see Fig. 5)
•
Slide the lower push bars (Fig. 5/Item 6) onto
the push bar holders.
•
Screw the tubes together, using the screws
supplied (Fig. 5/Item 13).
There are 3 assembly holes so that the height
of the push bar can be adjusted to speci
fi
c user
requirements at any time. Use the hole which is
best suited for you, making sure that you use the
same hole on both sides.
Fitting the upper push bar (see Fig. 6)
•
Position the upper push bar (Fig. 1/Item 5)
such that its holes line up with the holes of the
lower bar.
•
Use the two socket head screws (Fig. 2/Item
13) to screw the tubes together.
•
Use the cable clips (Fig. 7a/7b) to attach the
power cable to the tubes of the push bars so
that it is possible to open and shut the ejector
flap.
Please ensure that the ejector
fl
ap can be opened
and closed easily!
Fitting the optional catch basket (see Fig. 8)
The basic version of the equipment does not in-
clude a catch basket. This is available separately
(Art. No. 3405577).
•
To hang the grass basket on the scarifier you
must lift the ejector flap (Item 10) with one
hand and with the other hand take hold of the
grass bag by the handle and hook it onto the
scarifier from above.
Danger!
Before you ever hook the grass basket to the sca-
ri
fi
er you must ensure that the motor is switched
o
ff
and the cutting unit is not rotating.
Adjusting the working depth (see Fig. 9)
The scari
fi
er depth is adjusted at the two front
wheels using the adjustment mechanism. For this,
pull out the adjusting screw and turn the wheel to
the left or right into one of the available positions
(0/1/2/3).
The scari
fi
er depth must always be identically set
on both sides!
0 = drive/transport position
1 = scari
fi
er depth 3 mm
2 = scari
fi
er depth 7 mm
3 = scari
fi
er depth 9 mm
Anl_GC_SC_36_31_Li_Solo_SPK9.indb 22
Anl_GC_SC_36_31_Li_Solo_SPK9.indb 22
20.09.2018 15:41:35
20.09.2018 15:41:35