EINHELL BG-SH 2, Оригинальная инструкция по эксплуатации

Страница: 13 / 92

GB
- 13 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
General safety instructions
WARNING!
Read all safety warnings and all instructions. Save
all warnings and instructions for future reference.
Please pay close attention to the following infor-
mation and safety instructions to ensure the best
possible protection and comfort.
•
Whenever you use the helmet, first check that
all components are properly attached, adjus-
ted and serviced .
•
Always use the helmet with the correct set-
tings to ensure the required protection .
•
The helmet cannot guarantee complete
protection against injury . It does not replace
adherence to safe work procedures.
•
Never modify the structure or varnish of the
helmet.
•
The helmet must not come into contact with
liquids containing solvents or alcohol . These
substances can damage the plastic.
•
Knocks or other impacts can cause imper-
ceptible impact damage to the helmet, such
as hairline cracks . This compromises the
protection afforded by the helmet, especially
in emergencies. Replace the helmet if it has
been subject to extreme stresses.
•
Examine the helmet for damage (cracks,
tears) before every use . Only use the helmet
and accessories if they are in a flawless con-
dition.
•
Do not modify the helmet as this could com-
promise its protective effect .
•
Please adhere to all instructions and tips
regrading assembly, adjustments and mainte-
nance of the ear protectors .
•
The ear protectors are intended to protect
your ears in noisy areas .
•
They should be worn for as long as the noise
persists .
•
The pads of the ear protectors will show signs
of wear over time . Examine them for tears or
loose spots after each use .
•
Do not clean the ear protectors with chemi-
cals or substances that are harmful to the
wearer .
•
Certain chemical substances can damage
this product . Detailed information is available
from the manufacturer .
•
Ear muffs and especially their foam padding
can wear down over time . Examine them re-
gularly for tears, loose spots and other signs
of wear .
•
Covering the foam pads with hygiene covers
can compromise the acoustics of the ear
muffs.
WARNING!
Failure to comply with the safety instructions pro-
vided for the ear protectors can seriously compro-
mise their protective e ff ect .
•
Always flip down the visor when wearing the
helmet .
•
It protects you from flying objects .
•
It does not offer protection from splashing
liquids, hot objects, electricity and infrared/
UV rays .
•
Do not use the visor in environments with
a predictable risk from hard or sharp flying
objects .
•
Wood shavings and their resin can damage
the visor and impair its transparency .
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Helmet
2. Visor (with bracket)
3. Ear protectors
4. Head strap adjuster
5. Ear protector adjuster
6. Head strap
2.2 Items supplied
Please check that the article is complete as
speci fi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
Anl_BG_SH_2_SPK9.indb 13 Anl_BG_SH_2_SPK9.indb 13 09.09.2020 08:05:03 09.09.2020 08:05:03