GB
- 10 -
cordless tool out of children’s reach.
4. Do not use damaged battery chargers.
5. Do not use the supplied battery charger to
charge other cordless tools.
6. In heavy use the battery pack will become
warm. Allow the battery pack to cool to room
temperature before commencing with the
charging.
7.
Do not over-charge batteries.
Do not ex-
ceed the maximum charging times. These
charging times only apply to discharged
batteries. Frequent insertion of a charged
or partly charged battery pack will result in
over-charging and cell damage. Do not leave
batteries in the charger for days on end.
8.
Never use or charge batteries if you sus-
pect that the last time they were charged
was more than 12 months previously.
The-
re is a high probability that the battery pack
has already su
ff
ered dangerous damage
(exhaustive discharge).
9. Charging batteries at a temperature below
10°C will cause chemical damage to the cell
and may cause a
fi
re.
10. Do not use batteries which have heated du-
ring the charging process, as the battery cells
may have su
ff
ered dangerous damage.
11. Do not use batteries which have su
ff
ered
curvature or deformation during the charging
process or which show other non-typical sym-
ptoms (gassing, hissing, cracking,…)
12. Never fully discharge the battery pack (re-
commended depth of discharge max. 80%)
A complete discharge of the battery pack will
lead to premature ageing of the battery cells.
13. Never charge the batteries unsupervised.
Protection from environmental in
fl
uences
1. Wear suitable work clothes. Wear safety gog-
gles.
2.
Protect your cordless tool and the battery
charger from moisture and rain.
Moisture
and rain can cause dangerous cell damage.
3. Do not use the cordless tool or the battery
charger near vapors and in
fl
ammable liquids.
4. Use the battery charger and cordless tools
only in dry conditions and an ambient tempe-
rature of 10-40°C.
5. Do not keep the battery charger in places
where the temperature is liable to reach over
40°C. In particular, do not leave the battery
charger in a car that is parked in the sunshine.
6.
Protect batteries from overheating.
Over-
loads, over-charging and exposure to direct
sunlight will result in overheating and cell
damage. Never charge or work with batteries
which have been overheated – replace them
immediately if possible.
7.
Storage of batteries, battery chargers
and cordless tools.
Store the charger and
your cordless tool only in dry places with an
ambient temperature of 10-40°C. Store your
lithium-ion battery pack in a cool, dry place at
a temperature of 10-20°C. Protect them from
humidity and direct sunlight. Only place fully
charged batteries in storage (charged at least
40%).
8. Prevent the lithium-ion battery pack from free-
zing. Battery packs which were stored below
0°C for more than 60 minutes must be dispo-
sed of.
9. When handling batteries beware of electro-
static charge: Electrostatic discharges cause
damage of the electronic protection system
and the battery cells. Avoid electrostatic char-
ging and never touch the battery poles.
Batteries and cordless electric equipment contain
materials that are potentially harmful to the envi-
ronment. Never place any rechargeable batteries
or cordless electric machines or tools in your
household refuse.
The rechargeable battery should be taken to a
suitable collection center for proper disposal. If
you do not know the whereabouts of such a coll-
ection center, you should ask in your local council
o
ffi
ces.
To ensure that any defective/damaged lithi-
um-ion batteries are properly packaged and
delivered when you send them to us, please
contact our customer service or the point of
sale at which the equipment was purchased.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and
fi
res.
Safety Information for all Applications
a) This electric tool is designed for
use as a grinder/sander and cutting-o
ff
machine. Obey all the safety instructions,
general instructions, illustrations and
data supplied with the tool.
If you fail to
obey the following instructions, you may
su
ff
er an electric shock,
fi
re and/or serious
injuries.
Anl_TE_AG_18_100_Li_EX_PH_SPK7.indb 10
Anl_TE_AG_18_100_Li_EX_PH_SPK7.indb 10
28.10.2020 12:58:52
28.10.2020 12:58:52
