GB
- 6 -
circumstances.
f) Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be
fi
tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work.
You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch.
An electric tool that cannot be
switched on or o
ff
is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down.
This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance.
Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is a
ff
ec-
ted. Have damaged parts repaired before
using the appliance.
Many accidents are
caused by badly maintained electric tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, attachments, etc. in accordance with
these instructions. Take the conditions in
your work area and the job in hand into
account.
Using electric tools for any purpose
other than the one for which they are intended
can lead to dangerous situations.
5. Service
a) Have your electric tool repaired only by
trained personnel using only genuine
spare parts
. This will ensure that your elec-
tric tool remains safe to use.
Safety Information for all Applications
a) This electric tool is designed for
use as a grinder/sander and cutting-o
ff
machine. Obey all the safety instructions,
general instructions, illustrations and
data supplied with the tool.
If you fail to
obey the following instructions, you may
su
ff
er an electric shock,
fi
re and/or serious
injuries.
b) This electric tool is not designed for
sanding, working with wire brushes or
polishing.
Use of the electric tool in ways it
was not intended could lead to dangerous
situations and injuries.
c) Do not use any accessories which have
not been designed and recommended
by the manufacturer speci
fi
cally for this
electric tool.
Just because you can attach an
accessory to your electric tool, this does not
guarantee that you can use it safely.
d) The maximum speed of the plug-in tool
must be at least as high as the maximum
speed speci
fi
ed on the electric tool.
Ac-
cessories which rotate faster than the maxi-
mum speed may break and be catapulted out
of the tool.
e) The external diameter and thickness of
the plug-in tool must comply with the
dimension speci
fi
cations of your electric
tool.
Plug-in tools of the wrong size cannot
be adequately screened or checked.
f) Plug-in tools with thread must
fi
t exactly
on the thread of the grinding spindle. In
the case of plug-in tools that are
fl
ange-
fi
tted, the hole diameter of the plug-in
tool must
fi
t the mounting diameter of the
fl
ange.
Plug-in tools that are not exactly se-
cured to the electric tool will rotate irregularly,
vibrate a great deal and might result in you
losing control.
g) Do not use damaged plug-in tools. Before
use, check plug-in tools such as
grinding/sanding wheels for splintering
and cracks, grinding/sanding disks for
cracks, wear or heavy wear, and wire bru-
shes for loose or broken wires. If the elec-
tric tool or the plug-in tool is dropped,
check whether it is damaged or use an
undamaged plug-in tool. When you have
Anl_TC_AG_100_EX_PH_SPK7.indb 6
Anl_TC_AG_100_EX_PH_SPK7.indb 6
28.10.2020 11:21:38
28.10.2020 11:21:38
