5
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1. Torque
selector
2. Quick-change drill chuck
3. Changeover
switch
4. ON/OFF
switch
5. Battery
pack
6. Battery
charger
7.
Pushlock button
8. LED
lamp
3. Items supplied
n
Open the packaging and take out the equipment
with care.
n
Remove the packaging material and any
packaging and/or transportation braces (if
available).
n
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
transport damage.
n
If possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
n
Cordless drill/screwdriver
n
Battery pack
n
Battery charger
n
Original operating instructions
n
Safety instructions
4. Proper use
The cordless drill/screwdriver is designed for
tightening and undoing screws, as well as for drilling
in wood, metal and plastic.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Voltage supply
12 V d.c.
Idling speed:
0-500 rpm
Torque settings:
11+1
Forward and reverse rotation
yes
Chuck clamping width
max. 10 mm
Battery charging voltage
10,8 V d.c.
Battery charging current
2 A
Mains voltage for charger
100-240 V ~ 50-60 Hz
Charging time:
1 hour
Battery type:
Li-Ion
Weight
0.85 kg
Anleitung_TH_CD_12_Li_SPK7__ 10.06.13 15:23 Seite 5
