GB
- 9 -
•
Properly dispose of residual paint and
cleaning agents in accordance with local laws
and regulations.
•
Residual paint must be taken to a suitable
collection point. If you are not sure, ask the
local council where the nearest collection
point is.
•
When you are working with the paint spray
gun indoors or outdoors, the gun must not
suck in any solvent fumes.
•
When you are working outdoors, pay atten-
tion to the wind direction. The wind can dis-
tribute the material over long distances and
cause damage.
•
Do not allow children to handle the gun.
•
Never open the gun to carry out electrical
repairs.
•
Spraying into the skin can introduce toxins
into the body. Call a doctor immediately if the
spray jet causes a skin injury or penetrates
the skin.
•
Children are not allowed to use this equip-
ment. Children should be supervised so that
they do not play with the equipment. Children
are not allowed to carry out cleaning or main-
tenance.
•
This equipment must not be used by persons
with reduced physical, sensory or mental
capacities or those with a lack of experience
and knowledge.
2. Layout and items supplied
2.1 Layout (Fig. 1/4)
1. Suspension
fi
xture
2. Motor
unit
3. Power
cable
4. Union nut (spraying unit for indoor wall paints)
5. Lever for setting the spray width (1× per
spraying unit)
6. Trigger (1× per spraying unit)
7. Setting screw for controlling the material
quantity (1× per spraying unit)
8. Paint tub (1× per spraying unit)
9. Spraying unit for indoor wall paints
10. Lid (1× per paint tub)
11. Spraying unit for enamels and varnishes
12. Union nut with adjusting ring (spraying unit for
enamels and varnishes)
13. Nozzle set 3.5 mm (needle and nozzle)
14. Needle removal tool
15. Container for checking the viscosity
16. Cleaning needle
17. Cleaning brush
18. Safety catch
19. Air cap (1× per spraying unit)
20. Nozzle (1× per spraying unit)
21. Nozzle seal (1× per nozzle)
22. Twist cap (1× per spraying unit)
23. Needle (1× per spraying unit)
24. Venting tube (in several pieces)
25. Intake tube
26. Lid seal (1× per lid)
27. Tub seal (1× per paint tub)
28. Air
fi
lter (motor unit)
29. Filter cover (motor unit)
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su
ff
ocating!
•
Original operating instructions
3. Proper use
The machine is suitable for spraying solvent-
based and water-soluble lacquers, varnishes,
primers, 2-component lacquers, clear lacquers,
vehicle topcoats, stains and wood preservatives.
It must not be used for outdoor wall paints, alkali-
ne solutions or acidic substances.
Anl_BT_FSS_500_EX_UK.indb 9
Anl_BT_FSS_500_EX_UK.indb 9
05.10.2021 12:45:33
05.10.2021 12:45:33
