GB
- 22 -
6.9 Removable holding clip (Fig. 1 / item 6)
When the holding clip (6) is mounted, the device
can be attached e.g. to a belt. The removable hol-
ding clip can be screwed either to the left or right-
hand side of the equipment. It is optional – it does
not need to be attached if you do not need it.
7. Cleaning, maintenance and
ordering of spare parts
Danger!
Always pull out the battery pack before starting
any cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could at-
tack the plastic parts of the equipment. Ensu-
re that no water can seep into the device. The
ingress of water into an electric tool increases
the risk of an electric shock.
7.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
8. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offices.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TE_DY_18_Li_SPK9.indb 22
Anl_TE_DY_18_Li_SPK9.indb 22
12.01.2022 08:42:11
12.01.2022 08:42:11
Содержание 42.599.80
Страница 2: ... 2 Anl_TE_DY_18_Li_SPK9 indb 2 Anl_TE_DY_18_Li_SPK9 indb 2 12 01 2022 08 42 03 12 01 2022 08 42 03 ...
Страница 118: ... 118 Anl_TE_DY_18_Li_SPK9 indb 118 Anl_TE_DY_18_Li_SPK9 indb 118 12 01 2022 08 42 18 12 01 2022 08 42 18 ...
Страница 119: ... 119 Anl_TE_DY_18_Li_SPK9 indb 119 Anl_TE_DY_18_Li_SPK9 indb 119 12 01 2022 08 42 18 12 01 2022 08 42 18 ...
Страница 120: ...EH 01 2022 01 Anl_TE_DY_18_Li_SPK9 indb 120 Anl_TE_DY_18_Li_SPK9 indb 120 12 01 2022 08 42 18 12 01 2022 08 42 18 ...