EINHELL 41.407.50, Оригинальная инструкция по эксплуатации

Страница: 18 / 150

GB
- 18 -
This equipment is not allowed to be used by
children. Children should be supervised so that
they do not play with the equipment. Children are
not allowed to carry out the cleaning or mainte-
nance. This equipment is not allowed to be used
by people with limited physical, sensory or mental
capacities or by those with insu ffi cient knowledge
or experience unless they are supervised or inst-
ructed by a person who is responsible for them.
4. Technical data
Rated voltage: ........................220-240 V ~ 50 Hz
Power consumption: ................................ 1500 W
Rated pressure: .......................... 9 MPa (90 bar)*
Permissible pressure: ...... max. 13 MPa (130 bar)
Rated
fl ow rate: ......................................5.5 l/min
Max. water inlet pressure: ...........0.7 MPa (7 bar)
Protection class: ...........................................II /
쓑
Weight: .......................................... approx. 5,4 kg
* The rated pressure depends on the accessories
used with the pressure washer.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60335-2-79.
L
pA
sound pressure level ........................ 78 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level .......................... 91 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-mu ff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60335-2-79.
Vibration emission value a
h
≤ 2.5 m/s
2
K uncertainty = 0.6 m/s
2
The speci fi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci fi ed value
in exceptional circumstances.
The speci fi ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci fi ed vibration value can be used for initi-
al assessment of a harmful e ff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
It is recommend for the power supply to this ma-
chine either to be connected via a residual current
device circuit-breaker, which interrupts the power
fl ow as soon as the leakage current to earth ex-
ceeds 30 mA for 30 ms, or for it to be equipped
with an earth tester.
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
Anl_TC_HP_130_SPK9.indb 18 Anl_TC_HP_130_SPK9.indb 18 30.04.2020 10:40:55 30.04.2020 10:40:55