EINHELL 34.310.61, Руководство по эксплуатации

Страница: 8 / 28

GB
- 8 -
vibrations, immediately switch it off and check
it.
•
Ensure that you avoid paths that could restrict
the free movement of the extension cable.
•
Keep cables away from the cutters. The cut-
ters may cause damage to the cables and
result in contact with active parts.
Maintenance and storage
•
Always make sure that all nuts, bolts and
screws are tightened securely so that the ma-
chine is in safe working condition.
•
Allow the motor to cool before you put the
machine in an enclosed area.
•
For your own safety, replace worn or dama-
ged parts without delay.
•
Switch the machine off and pull the power
plug before carrying out any adjustment or
cleaning work on it, and before checking to
see if the mains connection is entwined or
damaged.
•
Switch off the motor and pull the power plug:
- before you dislodge any blockages or clogs.
- before you clean the machine, inspect it or
carry out work on the machine.
- after you have traveled over an obstacle.
- if you have struck a foreign object.
- if the equipment begins to experience ex-
ceptionally strong vibrations
•
Do not touch damaged cables before discon-
nected from the power supply. Touching a da-
maged cable may result in contact with active
parts.
•
Do not touch the cutters before the equip-
ment is disconnected from the power supply
and the cutters have reached a standstill.
Do not lose these safety instructions
Explanation of the symbols on the machine
(Fig. 13):
1. Danger! Note the instructions for use!
2. Danger! If the cable is damaged or cut, pull
out the power plug from the mains immediate-
ly.
3. Danger! Never use the equipment in damp
locations.
4. Caution! Danger from catapulted parts; keep
a safe distance.
5. Danger! Rotating tool.
6. Caution! Wear safety goggles!
7. Caution! Wear ear mu ff s!
8. Danger! Pull the power plug before carrying
out maintenance, cleaning and repair work.
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1. Top push bar
2. Bottom push bar
3. Motor unit
4. Hoe blades
5. Cable strain-relief clamp
6. Two-hand safety switch
7. Cable securing clips
8. Star nut (4x)
9. Screw (4x)
10. Transport wheel (2x)
11. Wheel cap (2x)
2.2 Items supplied
Please check that the article is complete as
speci fi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su ff ocating!
•
Engine unit
•
Lower push bar
•
Top push bar
•
Cable strain-relief clip
•
Cable securing clip (2x)
•
Star nut (4x)
•
Screw (4x)
•
Transport wheel (2x)
•
Wheel cap (2x)
•
Original operating instructions
•
Safety instructions
Anl_GC-RT_1545_GB_Korea.indb 8 Anl_GC-RT_1545_GB_Korea.indb 8 29.04.2022 09:05:34 29.04.2022 09:05:34