EN
- 13 -
15. Abrasive paper grit 120
16. Hexagon key (8 mm)
17. Socked head screw M10 x 20 mm
(2 pcs)
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and su
ff
ocating!
•
Cordless po Orbital sander
•
Additional handle
•
Polishing / sanding disk
•
Foam polishing pad
•
Synthetic fleece bonnet
•
Abrasive paper grit 60/80/120
•
Hexagon key
•
Socket head screw (2 pcs)
•
Original operating instructions
•
Safety information
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C charger
Explore b charger options at
einhellUSA.com
3. Intended use
The machine is designed for polishing coated
surfaces and for sanding wood, iron, plastic and
similar materials using the appropriate abrasive
paper.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Misuse
All uses of the equipment that are not listed in
the chapter “Intended use” are considered to be
cases of misuse.
The equipment is not allowed to be used for the
following purposes:
•
Machining of paintwork containing lead or
machining of types of wood and metal that
give rise to harmful or toxic dust
•
Sharpening or engraving with related
attachments
•
Machining of material containing asbestos
•
Use in explosive areas
•
Sanding of damp walls
In these cases there is a risk of injury.
The user of the equipment shall be liable for all
damage to property and injury to persons caused
by any misuse.
The use of any other components or any non-
original components on the equipment shall
render the manufacturer’s warranty null and void.
Residual risks
Even when the equipment is used properly, a
certain residual hazard cannot be ruled out.
The following potential dangers may arise in
connection with the equipment's design and
construction:
•
Contact with the unguarded wheel (injuries
through cutting)
•
Reaching into the wheel while it is still rotating
(injuries through cutting)
•
Catapulting of parts of the wheel (injuries
through cutting or bruising)
•
Catapulting of parts of the material being
processed (injuries through cutting or
bruising)
•
Risk of fire from flying sparks
•
Damage to hearing if the compulsory hearing
Anl_CE_CP_18_180_Li_E_SPK7_USA.indb 13
Anl_CE_CP_18_180_Li_E_SPK7_USA.indb 13
11.11.2019 07:52:19
11.11.2019 07:52:19
