1. Items supplied (see Fig. 1)
1
Machine foot
2
Cross strut
3
Diagonal strut
4
Nut M6, self-locking
5
Screw M6x18
6
Screw M8x12
7
Nut M8, self-locking
8
Washer Ø6mm
2. Assembly (see Fig. 1)
First screw the feet (1) together.
To do so, arrange the feet in pairs as illustrated
in Figure 1 and screw each pair together with a
M8x12 screw (6) and self-locking nuts M8 (7)
so that the feet can still be swiveled. Then
insert the M6x18 screws (5) below the two slots
and secure with 6mm washers (8) and M6 self-
locking nuts (4). Please make sure that the feet
can still be folded.
Finally, join together the pre-assembled feet
with the cross struts (2) and the slightly longer
diagonal struts (3) using M6x18 screws (5) and
M6 self-locking nuts (4.).
Important!
Be sure to wear safety gloves and all
other essential safety equipment when
working on the sawing trestle!
It is also imperative to follow the safety
instructions issued with the saw!
Take care that you do not injure yourself
on sharp corners or edges.
Place the chain saw trestle on a flat sur-
face and make sure that the equipment
cannot topple.
Do not overload the chain saw trestle
(nominal load 100 kg).
3. Folding down the sawing trestle:
After work is completed, the sawing trestle
can be folded down for storage in minimum
space.
4. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
앬
Type of machine
앬
Article number of the machine
앬
Identification number of the machine
앬
Replacement part number of the part requi
red
For our latest prices and information please go
to www.isc-gmbh.info
4
GB
Anleitung KSB 101_SPK7_4500065:Anleitung KSB 101 SPK7 09.08.2007 11:58 Uhr Seite 4
