SET-UP PROCEDURE
WARNING! The inflatable unit must never be setup or operated in windy conditions over
15mph. Serious injury or damage can result from operating the inflatable unit in windy
conditions.
Step 1. Survey the site
you plan to install upon. Select a suitable
location which is flat and has adequate space for the fully inflated unit.
Keep at least 10 feet of clearance on all sides.
IMPORTANT: Make
sure that overhead obstructions or sharp or protruding ground
objects will not interfere with inflation or damage the inflatable
unit.
Ensure the area in which the unit is to be used is clear of all
protrusions and sharp objects that may damage the skin of the
inflatable. The general area should be non-abrasive. Ideally, a flat soft
grassy location is perfect.
CAUTION:
Before deciding on location, verify that pounding
stakes into the ground will not create a hazard by violating utility lines such as gas, water or
power lines in the staking area. Contact your local utility company for information.
WARNING! Keep all inflatable structures at least 15 feet
away from high voltage lines.
PLEASE NOTE: How the structure is folded because this is the recommended method to use
when repacking the unit in its transport packaging game bag. (Some inflatables do not come
with game bags)
12405Telegraph Road, Santa Fe Springs, CA 90670 Toll Free (800) 569-0719 • (562) 777-1140 • Fax (562) 777-1161
www.einflatables.com
email: [email protected]
4
