Network Control Software Application
34
Network Control Software Application
Register the projector(s) which needs to be controlled.
“ Auto search ” can help you to seek the projector(s) source easily.
After registering in the work group, you can start to control the projector.
Group the projector(s) into different sections.
You can monitor the status easily by GROUP NAME function in the network.
Monitor the status for each projector.
a.You can manage and change the monitoring content by System Parameter Setting.
b. The Lamp timer, filter working time or system warning feedback etc. can be
obtained by checking the status of projector(s).
Control the booked projector(s).
The status can be refreshed and acquired by MONITOR functions; you can also
operate the function easily by Network Control.
NOTE
To monitor and control the projector(including stand-by mode), the following
conditions are needed to be ready:
(1) Projector is powered on.
(2) Projector is connected to network.
(3) LED light of the projector network port shows normal. (Green light on, Orange
twinkling)
*
Stand-by mode indictor: Green LED (Power) on the projector’s control panel flashes.
LAN
