background image

49

Setting

Note:

  • 

Auto Keystone

 corrects vertical distortion only, not 

correct horizontal distortion.

  • The Auto Keystone function can not work when the 

Ceiling 

is set 

On

 in the Setting menu (p.54).

  • Perfect correction of the image distortion can not 

be ensured with the Auto setup function. If the 
distortion is not corrected properly by pressing the 
AUTO SETUP/CANCEL button, adjust manually 
by pressing the KEYSTONE button on the remote 
control or selecting 

Keystone

 in the Setting menu 

(pp.27,50).

  • 

Fine sync

Total dots

Horizontal

 and 

Vertical

 of 

some computers can not be fully adjusted with the 
Auto PC adjustment function. When the image is 
not provided properly with this operation, manual 
adjustments are required (pp.35-36).

Auto setup

Input search

This function detects the input signal automatically. When 

a signal is found, the search will stop. Use the Point ▲▼ 

buttons to select one of the following options.

Off

 ......Input search will not work.

On 1

 ...Input search works under the following situation.

 

– When pressing the AUTO SETUP/CANCEL 

button on the top control.

 

– When pressing the AUTO SET/CANCEL button 

on the remote control.

On 

 ...Input search works under the following situation.

 

– When turning on the projector by pressing the 

ON/STAND-BY button on the top control or the 

remote control.

 

– When pressing the AUTO SET/CANCEL button 

on the remote control.

 

– When pressing the AUTO SETUP/CANCEL 

button on the top control.

 

–  When the current input signal is cut off.*

*

 

If the No show or Freeze function is active, cancel it to 

activate the Input search. It is also unavailable when On-

Screen menu is displayed.

Auto PC adj .

On

. . . . . .  Enables Auto PC adjustment when pressing       

                   the AUTO SET/CANCEL button on the remote 
                   control or the AUTO SETUP/CANCEL button 
                   on the top control.

Off

. . . . . .  Disables Auto PC adjustment.

 Auto Keystone 

Auto

 . . . .    Always works and corrects keystone 

distortion according to the projector's tilt.

Manual

  . .  Works only when pressing the AUTO SETUP/

CANCEL button on the top control or the 

AUTO SET/CANCEL button on the remote 

control.

Off

. . . . . .  Disables Auto Keystone.

Auto setup Menu

Note:

 •While 

Input search

 is set to 

On 1

 or 

On 

, the status of Input 

and Lamp are displayed every time the signal is switched.

 •Only the last selected input source can be detected.
 •If the INPUT button on the top control or the COMPUTER, 

VIDEO or NETWORK buttons on the remote control is pressed 
during Input search is in progress, Input search will stop and go 
back to the previous input signal.

  • 

Input search, Auto PC adj . 

and

 Auto Keystone

 can not be 

set 

Off

 at the same time. 

This function enables Input search, Auto Keystone correction 

and Auto PC adjustment by pressing the AUTO SETUP/

CANCEL button on the top control or the AUTO SET/CANCEL 

button on the remote control. Settings for those functions can 

be altered as follows:

Содержание LC-XB43N




















































































Отзывы: