26
black out
→
the captured image
→
normal
→
• • • • •
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When the projected
image is captured and is set as User in the Logo selection
(p.48), the screen changes each time you press the NO
SHOW button as follows.
NO SHOw button
Press the P-TIMER button on the remote control to operate
the Count up/Count down function. See page 52 for details
of Setting for the P-timer function.
To stop the count time, press the P-TIMER button. To cancel
the P-Timer function, press and hold the P-TIMER button for
a few seconds.
P-TIMER button
Press the IMAGE button on the remote control to select a
desired image mode of the screen (pp.33, 41).
IMAGE button
No show
disappears after 4 seconds.
Note:
•
See the previous page for the description
of other buttons.
IMAGE button
NO SHOw button
P-TIMER button
SCREEN button
Select the screen size (pp.35-37, 44-45).
SCREEN button
Basic Operation
P-timer
002:02
