Eiki LC-WNS3200, Руководство по обслуживанию

Страница: 7 / 71

-7-
Maintenance and cleaning
Cleaning the filter
The air filter prevents dust from accumulating on the surface of the optical elements inside the projector. Should the air
filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in a buildup of internal
heat and adversely affects the life of the projector. If the Filter warning icon appears on the screen, the air filter should be
cleaned immediately. Clean the air filter following the steps below.
1 Turn off the projector, and unplug the AC power cord
from the AC outlet.
2 Remove the air filter.
3 Gently clean the filter with a brush.
4 Reinstall the filter into the projector properly.
Filter
Caution
Do not operate the projector with the air filter
removed. Dust may accumulate on the optical
elements, degrading picture quality.
Do not put any small objects into the air intake
vents. Otherwise, it may result in malfunction of
the projector.
Recommendation
We recommend avoiding dusty/smoky environments
when you operate the projector.
Usage in these environments may cause poorimage
quality.
When you use the projector under dusty or smoky
conditions, dust may accumulate on the lens, LCD
panels, or optical elements inside the projector. When
the symptoms above are noticed, contact your authorized
dealer or service station for proper cleaning.
Filter counter reset
Be sure to reset the filter counter after cleaning or
replacing the filter.
1. Press Menu on the remote control to display the screen
menu. Press

to select Expand, then press OK
button.
2. Press

to select Filter, and then press OK button.
Press

to select Filter counter reset and press OK
button, "Filter counter Reset?" appears on sreen, select
"Yes" to continue.
3. When another dialog box pops up, select "Yes" to reset
the filter.