51
This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.
Appendix
The CE Mark is a Directive conformity
mark of the European Community (EC).
Some displays are not seen
– Check the Display item. (See page 38.)
during the operation.
PIN code dialog box appears at start-up.
– PIN code lock is being set. Input a PIN code (1234 or numbers you have
set). (See pages 17 and 43.)
The Remote Control does not work.
– Check the batteries.
– Make sure there is no obstruction between the projector and remote
control.
– Make sure you are not too far from the projector when using the remote
control. The maximum operating range is 16.4’ (5m).
– Make sure the code of the remote control is conformed to that of the
projector. (See page 42.)
– Unlock the Key lock for the remote control in the Setting Menu.
(See page 42.)
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the
service center. Give the model number and explain about the problem. We will advise you how to obtain service.
Appendix
