45
GB
APPENDIX
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
Remote Control
Units dose not work.
●
Check the batteries.
●
Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”.
●
Make sure anything is blocking between the Remote Receiver and the Remote Control
Units.
●
Make sure you are not too far from the projector when using the Remote Control Units.
Maximum operating range is 5m.
Problem:
Try these Solution
Wireless Mouse
function does not
work.
●
Check the cable connection between the projector and the computer.
●
Check the mouse setting on your computer.
●
Turn the projector before your turn on the computer.
The image data in
memory card isn’t
displayed.
●
Check the memory card is inserted properly into PC CARD SLOT.
●
Check SmartMedia or PC Card Adapter is set properly.
●
Check MCI mode is selected.
●
Check the image data is recorded in the memory card properly.
●
Start the projector again.
The image data can’t
be written in, read
from the memory
card.
●
Check the projector is turned on.
●
Check “Card access” in VIEW menu is selected.
●
Check Control Cable for Serial Port (optional) is connected properly.
●
Check the memory card is inserted properly into PC CARD SLOT.
●
Check Media Card Imager (supplied) is installed in your computer properly.
●
Check the setting in Media Card Imager (like Serial Port Setting) is set properly.
