Basic Operations
33
Connecting to HDBaseT Module
HDBaseT is a connectivity standard for whole-house and
commercial distribution of uncompressed HD multimedia content.
After installing the HDBaseT module to the projector and using
the HDBaseT switching matrix (commercially available), you
may connect multiple sources to your projector with HDBaseT
connection.
VGA IN
YPbPr
RJ45
Lan
HDMI
RS232
RJ45
HD Connect
IR TX
IR RX
Use a shielded LAN cable up to 100 meters in length rated at
CAT5e or better.
The maximum transmission distance is 100 m. However, it may be
shorter under some circumstances.
Avoid using the LAN cable when it is coiled or bundled.
Inserting or removing the LAN cable during projection may cause
noise.
Connectivity with all HDBaseT transmitters on the market is not
guaranteed.
Some HDBaseT transmitters may not enable correct projection
when used to connect source equipment to the projector.
Commands cannot be received through HDBaseT when the
projector is in standby mode.
Note
• The illustration
is for reference
only, actual layout
may vary.
Содержание EK-830 Series
Страница 2: ......
Страница 8: ...Usage Notice 8 Safety Labels Usage Notice...