Eiki EK-600LU, Руководство пользователя

Страница: 46 / 85

46
Note:
● If the control panel accidentally becomes
locked and you do not have the remote
control nearby or there is something
wrong with your remote control, contact
the dealer where you purchased the
projector or the service center.
OSD setting-Setting
Keylock
Set the security for the projector operation.
O ff... The control panel and remote controller
are effective.
P rojector...
Lock the operation of the control
panel. Use the remote control to
unlock.
R emote Control ...
Lock the operation of the
remote control. Use the
control panel to unlock
.
Contrast optimization
Select this function to optimize and compensate
signal automatically on the basis of the image, to get
the best contrast image.
On .... Increase the contrast of the image.
Off .... Disable this function.
Setting
Off
Eco
Off
0 sec
Off
Direct power on
Standby mode
High land
Cooling fast
Key lock
Contrast optimization
Laser control
Sound
HDMI Setup
Laser Control
Modify the brightness according to the environment and the aim during the projectino.
Light source mode:
Normal..............Normal brightness and enable the Laser adjust function.
Full Normal.......Normal brightness and disable the Laser adjust function
ECO.1/ECO.2...Lower the brightness and reduce energy consumption.
Laser adjust.:
50% ~ 100% ....Arrange the brightness according the setting.

Note:
This adjustment can only launched while the Light source mode as Normal.
Sound
Adjust the volume.
Volume .... Press

button to increase the volume, press

button to decrease the volume.
Mute ........ Press

button to switch mute function. (On/Off)
HDMI setup (HDMI only)
Switch the settings of "Image" or "Sound" in "HDMI setup" menu, if the image is not projected properly.
Image
64-940 ..... For the video device.
0-1023 ..... For the computer device.

Note:
The optimal setting varies depending on the output setting of the connected external device.
Refer to the operation instruction of the external device regarding the output of the external device.
Sound
HDMI ....... The image and audio are transmitted.
VGA ........ The audio signal is input by "AUDIO IN" terminal.
HDMI EQ setting
Change the setting of the HDMI signal level while the projection image has distrubed by noise, or the
image cannot project probably.