Eiki EK-510U, Руководство пользователя

Страница: 31 / 89

31
Keystone adjustment
Adjustment pad
Keystone adjustment
Adjustable
pad
You may use the adjustment leg to raise your pro-
jector up to 5.0 degree.
Turn the pad to tilt your projector to required height.
To raise your projector, turn both pads clockwise.
To lower down your projector or close the pad, turn
both pads counterclockwise.
You may use the auto setup function to adjust your
projector’s keystone distortion automatically or do
this with the remote controller or OSD menu manu-
ally.
You may adjust keystone distortion of image in your pro-
jector with the keystone adjustment.
Follow steps below to adjust keystone distortion of pro-
jected image manually.
Press the KEYSTONE button on your remote controller.
The Keystone selection menu show up, press
button
to select..
The keystone adjustment dialog box displays, press
button to adjust keystone distortion.
You may save your settings for keystone adjustment.
Keystone adjustment

  
● The arrow mark looks white when there is no keystone adjustment in existence.
● The arrow mark indicating the adjustment direction turns red.
● The arrow mark disappears when the maximum adjustment limit reaches.
● The keystone adjustment will be canceled if you press the keystone adjustment button when it is
displaying.
● The adjustable range is subject to source of signal input.
Keystone
adjustment
Basic operation
H/V Keystone
Corner correction
Curved correction
Reset value
H/V Keystone
Corner correction
Reset value
H/V Keystone
Adjust the projected image when the projector is on the
horizontal or vertical keystone distortion.
Corner correction
Adjust the projected image when the projector is key-
stone distortion of four corners .
Curved correction
Adjust the projected image when the projector linearity
is uneven or the projected images bent vertically and
horizontally.
(*This function is unavailable of EK-510U/EK-510UL)
Reset value
The correction values will be restored to the factory
defaults.
*for XGA / WXGA model
*for WUXGA model