Eiki EK-351WST, Руководство пользователя

Страница: 44 / 84

44
OSD setting-Expand
Keystone menu
Keystone
This function is used to store or reset the
keystone correction when the AC power cord is
unplugged.
1 Press MENU button on the remote control to
display screen menu. Press  button to select
"Expand", then press the OK button.
2 Press  button to select "Keystone", press the
OK button.
3 Press  button to select the item you want to
set, press the OK button.
Expend
Keystone
Keystone
H/V Keystone
Corner correction
Curved correction
Reset value Store
Keystone
Sets whether or not to keep the keystone
correction after turn off the projector or plug out
the power cord.
H/V Keystone
Adjust when the horizontal or vertical trapezoid of the projected image is distorted.
Store .... The keystone correction will be kept when plug out the power cord or turn off the projector.
Reset ... When "Standby mode" is set to "Eco", plug out the power cord or turn off the projector, the
keystone correction will be canceled. When "Standby mode" is set to "Normal", plug out the
power cord, the keystone correction will be canceled; turn off the projector, the keystone
correction will be kept.
Corner correction
Adjust when the four corners of the projected image are distorted.
Press▲▼◄►to adjust the item.

Note:
● The white arrows indicate that there is no correction.
● A red arrow indicates the direction of correction.
● An arrow disappears at the maximum correction.
Corner correction
Upper left Upper right Lower left Lower right
Reduce the upper
width with

button.
Reduce the left
width with

button.
Reduce the right
width with

button.
Reduce the lower
width with

button.