2.1 POWER ON command
2.2 POWER OFF command（Shut down Immediately ）
Command
Option
Command
Option
C00
POWER ON
C07
Video
C01
POWER OFF(Shut down Immediately ) C33
Component
C02
POWER OFF
C34
S-Video
C36
HDMI1
C15
NETWORK
C37
HDMI2（MHL）
C16
MEMORY VIEWER
C05
VGA IN 1
C17
USB DISPLAY
C06
VGA IN 2
2.3 POWER OFF command
Appendix
Serial Control
2.Basic commands
Distinguish the letter case, and enter Each command ends with [CR] (enter) .
Note: [ACK] "CR" is the return value for receiving valid commands.
Command
“C00”[CR]
Details
Power ON action
If the projector already in "Power ON" action, thus no need any command
During Power on countdown send "C00" command can stop the countdonw action.
Return
Value
Receive
Successfully
[ACK]［CR］
Receive
unsuccessfully
“？” [CR]
Command
“C01”[CR]
Details
Power OFF action
Send this command to shut down when you are in the power-on mode
Return
Value
Receive
Successfully
[ACK]［CR］
Receive
unsuccessfully
“？” [CR]
Command
“C02”[CR]
Details
Power OFF action
Send this command to pop up [POWER OFF] dialog box when you
are in the power-on mode,then send this command once again to
power on.
Return
Value
Receive
Successfully
[ACK]［CR］
Receive
unsuccessfully
“？” [CR]
38