24
Lamp Reset
To recount hours after replacing
the lamp.
Press the right key. The
message “Press Enter key
to confirm lamp reset
operation!” appears. Please
check if the user has
replaced the new lamp. If
yes, press
Enter
key. If not,
press
Menu
key or Esc key
on the remote controller to
quit.
Auto Adjust
For end users to fix the brightness
and contrast settings. This function
only works in the VGA mode.
Choose
Yes
. The values of
brightness and contrast vary
each time when pressing
Auto
key.
Choose
No
. The values of
brightness and contrast
remain the same.
Reset All
To return to the factory default.
Press the right key.
Source Type
To select RGB, Composite,
Component, HDTV(**),S-Video,
signals or Auto Scan.
Press key for
selection.
* Press “Auto” key to return to previous setup.
** HDTV: supporting EDTV 480p and HDTV 720p & 1080i.
5.7 Language
Please use up and down keys to choose the language you likened and press right
key to select. Press the
Menu
key or
Esc
key on the remote controller to return to
main menu.
