7 Operation
Page 14 / 33
NOTE
To prevent the lamp from injurying patients by overheating, after
the device is used continuously 300 seconds at P2 High Power
Mode
and P3 Turbo Mode, it will be prohibited to use the highest
light intensity output within 60 seconds.
When using, the light should be directly irradiated onto the
curing dental resins and composites to avoid improper exposure.
The disposable sleeve and protective light shield are highly
recommended.
If there is any abnormal functioning, stop using the device and
report to the distributor.
Gloves are compulsory during treatment.
Always disinfect the handpiece and light source head after each
treatment.
