Virhe. Määritä Aloitus-välilehdessä
标题
1, jota haluat käyttää tähän
kirjoitettavaan tekstiin.
Virhe. Määritä Aloitus-välilehdessä
标题
1,
jota haluat käyttää tähän kirjoitettavaan tekstiin.
Page 21 / 39
Cleaning, Disinfection and
Sterilization
Foreword
For hygiene and sanitary safety purpose, the components (Tips,
Wrench, and Insulating sleeve) must be cleaned, disinfected
and sterilized before each usage to prevent any contamination.
This concerns the first use as well as the subsequent uses.
Comply with your national guidelines, standards and
requirements for cleaning, disinfection and sterilization.
Reprocessing procedures have only limited implications to this
dental instrument. The limitation of the numbers of reprocessing
procedures is therefore determined by the function / wear of the
device. From the processing side there is no maximum number
of allowable reprocessing. The device should no longer be
reused in case of signs of material degradation.
In case of damage, the device should be reprocessed before
sending back to the manufacturer for repair.
General recommendations
The user is responsible for the sterility of the product for the
first cycle and each further usage as well as for the usage of
damaged or dirty instruments, where applicable after
sterility.
For your own safety, please wear personal protective
equipment (gloves, safety glasses, etc.).
Use only a disinfecting solution which is approved for its
efficacy (VAH/DGHM-listing, CE marking, and FDA approval)
and in accordance with the DFU of the disinfecting solution
manufacturer.
