2
Safety Instructions
•
Always read the safety instructions carefully.
•
Keep this User's Manual for future reference.
•
Keep this equipment away from humidity.
•
Place this equipment on a reliable flat surface before setting it up.
•
Do not stand it on soft furnishings.
•
If any of the following situation arises, get the equipment checked by a service
technician:
- The equipment has been exposed to moisture.
- The equipment has been dropped and damaged.
- The equipment has obvious signs of breakage.
- The equipment has not been working well or you cannot get it to work according to
the User's Manual.
Warning
•
To prevent the risk of electric shock, do not open the cover or the back of unit.
•
Do not block the ventilation holes of the device. Leave appropriate gap above and
around it to allow for adequate ventilation.
•
Do not place the device in an unventilated cabinet or on top of a unit which emits
heat.
•
Danger of explosion if battery in incorrectly replace. Replaced only with the same
or equivalent type.
•
The apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the apparatus.
•
The main plug is used as the disconnected device, the main plug shall remain
readily operable.
•
To reduce the risk of fire or electric risk, do not expose this apparatus to rain or
colds.
Copyright Statement
No part of this publication may be reproduced in any form by any means without the
prior written permission. Other trademarks or brand names mentioned herein are
trademarks or registered trademarks belong to EIGHT Limited.
Disclaimer
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding the
accuracy and completeness of this document and shall in no event be liable for any
loss of profit or any commercial damage, including but not limited to special, incidental,
consequential, or other damage.
This symbol indicates that this product incorporates double insulation
between hazardous mains voltage and user accessible parts. When
servicing use only identical replacement parts.
