
LAN port settings
System Administrator’s Guide
17
LAN port settings
Network settings for the LAN port can be assigned statically, or dynamically by a
DHCP server (Direct LAN). Alternatively you may choose to configure the LAN port as
a bridge (Bridged LAN).
Direct LAN
1
Click
Network Setup
on the main menu.
2. Select
Direct LAN
in for the LAN port.
3. Enter an
IP Address
and
Netmask
for the LAN network port. If you are using the
Shiva VPN Gateway in its default, network address translation mode, (“Network
address translation (NAT/masquerading)” on page 36), this will typically be part
of a private IP range, such as 192.168.1.1 / 255.255.255.0. Ensure DHCP
assigned is unchecked.
If you want to have your Shiva VPN Gateway obtain its LAN network settings
from an active DHCP server on your local network, check
DHCP
assigned then
Apply
. Note that anything in the IP Address and Netmask fields will be ignored.
You may also enter one or more DNS servers. Multiple servers may be entered
separated by commas.
4. Click
Apply
.
Bridged LAN
For details, see “Bridging” on page 29.
Содержание SHIVA 1100
