
6
GB
On receipt, check to ensure that the ap-
pliance has not been damaged during
transport. Transport damage should be
reported to the local distributor before the
wine cooler is put to use.
Remove the packaging. Clean the inside of
the cabinet using warm water with a mild
detergent. Rinse with clean water and dry
thoroughly (see cleaning instructions). Use
a soft cloth.
If during transport the appliance has been
laid down, or if it has been stored in cold
surroundings (colder than + 5°C), it must be
allowed to stabilise in an upright position for
at least an hour before being switched on.
Before use
Noise level
The noise level is very low. Both the com-
pressor and the fan has a very low noise
level during normal operation.
The compressor can run at different
speeds. This saves energy.
Higher compressor speed is used to incre-
ase the cooling capacity, for example at
initial switch on. The compressor speed will
also increase when if the thermostat’s set
point is lowered or if the unit is filled rapidly
with a large amount of (warm) wine bottles.
When the correct temperature is reached
or wine bottles are cooled the compressor
will again run at reduced speed and have a
very low noise level.
During start-up, the compressor will always
run with maximum speed. This provides a
higher level of noise until the set tempera-
ture has been reached.