10
USER MANUAL
ORTHOVET PRO BATTERY POWERED DRILL SYSTEM
T +49 7461 96 580 0 | F +49 7461 96 580 90 | [email protected] | www.eickemeyer.com
Removing the Attachments
Figure 15
Turn the rotary ring with grooves clockwise on the handpiece and pull the attachment out from the coupling (Fig. 15).
Precautions
•
To prevent injury, the power tool must be switched to “S = STOP” with the safety system during each manipulation.
• Only use original attachments and tools from EICKEMEYER®. Damage that arises from using attachments and tools made
by other manufacturers is not covered by the warranty.
• If the instrument is not needed during the operation, lay down the handpiece to make sure it is stable and cannot tip over.
To mount or remove attachments and cutting tools, always place the drive unit in an upright position on the sterile table.
Item no. Description
Maximum Speed Torque
195002
Jacobs Chuck with key, cannulated
, clamping range Ø 0.6 – 2.5 mm
0 – 1,200 rpm
≥ 3.0 NM
195003
Quick Chuck for KIRSCHNER-wires, cannulated
, clamping range Ø 0.6 – 2.6 mm
0 – 1,200 rpm
≥ 3.0 NM
195004
AO-Quick Chuck
0 – 1,200 rpm
–
195005
Oscillating Saw-Chuck
0 – 16,000 rpm
≥ 3.0 NM