background image

Congratulations! You are now the proud owner of a EICH 

T 1000 bass amplifier. This manual will help you get to 

learn all the useful and exciting features of one of the 

best amplifiers in the world. 

The new EICH T 1000 is extremely small in size but very 

big in sound. Composed of only the finest materials this 

compact sound machine covers a broad frequency range 

and impresses with a powerful punch.

Exclusive features and our new ultra-flat premium input 

stage set new standards in this amplifier class. The very 

effective tone controls suit all musical styles. The amps 

of the T 1000 series boast a four-band tone control sec-

tion which lets you easily dial any sound you want. The 

TASTE control emphasizes the tonal characteristics of 

the individual instrument. Set to the centre, the control 

has no effect on the signal. Turn it counter-clockwise to 

filter out some ultra-low frequencies and at the same 

time enhance a pronounced mid range. This is the ulti-

mate fretless tone. Turn it clockwise to soften the high 

end which leads to a pumping bass sound.

Additional features like an effects loop, Tuner Out, Line 

Out, Line In, two Speakon® outputs and a DI out with 

Pre/Post switch prove that the T 1000 amps are extreme-

ly versatile devices. T 1000 amps are ideal for travelling 

around the world due to their voltage switch which al-

lows them to be operated at 230 and 115 volts. 

The result is an impressive live performance with an un-

beatable power-to-weight ratio. 

The meticulous quality control during all stages of pro-

duction guarantees failsafe performance. Using only the 

best components available the unique circuit design and 

the professional workmanship make the T 1000 today’s 

state-of-the-art in top-of-the-line bass amp manufactu-

ring.

>> T 1000

IMPORTANT SAFETY INSTRUCTIONS

The apparatus shall not be exposed to dripping or splashing and that 

no objects with liquids, such as vases, shall be placed on the appara-

tus. The MAINS plug is used as the disconnect device, the disconnect 

device shall remain readily operable.

Warning: the user shall not place this apparatus in the area during 

the operation so that the mains switch can be easily accessible.

1.  Read these instructions before operating this apparatus.

2.  Keep these instructions for future reference.

3.  Heed all warnings to ensure safe operation.

4.  Follow all instructions provided in this document.

5.  Do not use this apparatus near water or in locations where con-

densation may occur.

6.  Clean only with dry cloth. Do not use aerosol or liquid cleaners. 

Unplug this apparatus before cleaning.

7.  Do not block any of the ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than 

the other. A grounding type plug has two blades and a third 

grounding prong. The wide blade or the third prong is provided 

for your safety. If the provided plug does not into your outlet, 

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particu-

larly at plug, convenience receptacles, and the point where they 

exit from the apparatus.

11. Only use attachments/accessories specified by the manufactu-

rer.

12. Use only with a cart, stand, tripod, bracket, or table specified 

by the manufacturer, or sold with the apparatus. When a cart is 

used, use caution when moving the cart/apparatus combination 

to avoid injury from tipover.

13. When a cart is used, use caution when moving the cart/appara-

tus combination to avoid injury from tipover.

14. Unplug this apparatus during lighting storms or when unused for 

long periods of time.

15. Refer all servicing to qualified service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such 

as power-supply cord or plug is damaged, liquid has been spilled 

or objects have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate normally, or has 

been dropped.

CAUTION:

 Use of controls or adjustments or performance of proce-

dures other than those may result in hazardous radiation exposure.

WARNING: To reduce the risk of FIRE or electric shock, do

not expose this apparatus to rain or moisture.

CAUTION:

 RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 

REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE 

REFER SERVICING TO QUALIFIED PERSONNEL

The lightning flash with arrowhead symbol, within an 

equilateral triangle, is intended to alert the user to the 

presence of uninsulated “dangerous voltage” within 

the product’ s enclosure that may be of suficient magni-

tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 

intended to alert the user to the presence of important 

operating and maintenance (servicing) instructions in 

the literature accompanying the appliance.

!

CE Declaration of Conformity

T 1000 Bassamp

We declare under our sole responsibility that this product is 
in conformity with the following standards or standardization 
documents in attention of operation conditions and installation 
arrangements according to operating manual:
EN 61000-3-2, EN 61000-3-3, EN 55013, EN 55020, EN 55022, 
EN 60065 according to the provisions of the regulations 
89/336/EWG and 73/23/EWG.

Gain

Clip

Input

Attack 

Time

Bass 

Boost

High 

Boost

Taste

Master

Mute Post

Gnd

Lift

DI

Lo

Hi

LoMid

HiMid

Compressor

Line/Effect Mix

Footswitch

Compressor/

Mute

Power

-10

0

10

0

10

0

10

0

10

0

10

0

10

0

10

0

10

Rich

Dry

/

Po

Powe

wer

3

Содержание T 1000










Отзывы: