17
Height Adjustment
The
EPF 200-3
includes a height adjustable protective hood.
Depending on the degree to which the milling disk is worn, the milling depth
can be adjusted to a max. depth of 5 mm.
To do this, loosen the thumb screw (1).
Adjust the desired milling depth by turning the depth stop (2). Tighten the
thumb screw (1) securely again.
Minimum milling depth Maximum milling depth
Retooling
Attention!
The grinding wheel might heat up enormously during operation. You
could burn your hands or get cut or ripped by the segments.
Therefore, always use protective gloves when changing the grinding
wheel.
Before any work on the tool, disconnect the plug from the mains!
1
2
+
-
Содержание EPF 200-3
Страница 2: ...2...
