background image

 

D3157 - Page 6 

Eibach Springs, Inc. | 256 Mariah Circle | Corona | California 92879-1751 | USA 
T +1 951-256-8300 
www.eibach.com 

MULTI-PRO-R2

 | INSTALLATION INSTRUCTIONS

 

1997-01 Acura Integra, Type-R, DC2 

PART NUMBER 

4020.713 

    

PERFORMANCE SUSPENSION                                                         

AUTOMOTIVE OEM/OES                                                         

HI-TECH INDUSTRIAL 

REAR SUSPENSION INSTALLATION 

            

 

 
 

 

 
 

            

 

 
 
 
 
 
 

1.  Install the Eibach Multi-Pro coilover into the lower 

control arm with the reservoir facing the front of the 
car, slide it as far down as possible, then, slide the 
coilover upward into the upper OE mounting holes 
and secure it with the provided nuts.  

(See Photos 

17, 18 & 19)  Note:  Do not tighten at this time

 

 

      

 

 

 

2.  Secure the coilover to the lower control arm using 

the OE hardware.  

(See Photo 20)  Note:  Be sure 

to preload the suspension prior to tightening 
this bolt.  Uneven lowering and premature wear 
to the control arm bushing will result if not done 
properly.   
 

              
 

 

 
             

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Photo 17 

Photo 20 

Photo 18 

Photo 19 

Содержание MULTI-PRO-R2








Отзывы: